Countersunk pot magnet, Ø20 mm.
From 10 pieces : 4,00 EUR
From 50 pieces : 3,60 EUR
From 100 pieces : 3,00 EUR
From 500 pieces : 2,60 EUR
From 1000 pieces : 2,20 EUR
From 10 pieces : 5,00 EUR
From 50 pieces : 4,50 EUR
From 100 pieces : 3,75 EUR
From 500 pieces : 3,25 EUR
From 1000 pieces : 2,75 EUR
READ ABOUT POWER MAGNETS HERE BEFORE YOU BUY!
Product number: MAGZ-314-P
Countersunk magnets | Shallow magnets
Diameter: 2 cm.
Height: 7.2 mm.
Screw hole: Ø4.5 mm.
Strength: approx. 10 kg.
These countersunk pot magnets can be fastened with a countersunk screw (4.5 mm).
A strong neodymium magnet encased in a steel cap (pot). The steel improves the adhesiveness of the magnet due to direct contact with a thick steel surface.
Strength is measured directly on a thick, magnetic steel plate. The strength of the pot magnets is weakened the further away from the magnetic surface they get.
Pot magnets have a stronger pull when attached to horizontal surfaces than vertical surfaces as they tend to slide down vertical surfaces.
Please note: We recommend indoor use of the hook magnets as they are not stainless steel.
Not suitable for magnetic glass boards.
Strength: approx. 10,000 gr.
Surface: nickel-plated (Ni)