[Easy Guide] How To Glue one Magnet to Another - Here's How

When I read about the attraction between magnets recently, I started to wonder if it was possible to connect two magnets together with glue. So, I did some more digging to come up with this easy guide for how to glue one magnet to another.

How do you glue one magnet to another? To glue one magnet to another, you will need to clean the surfaces and scratch them to create a grip and prevent them from slipping. Once you apply the right type of glue, you will need to put pressure on both magnets and allow them to dry before using.

This entire process will occur after the polarity of each magnet has been determined, to ensure that the correct surfaces are being connected with the glue.

Considering the strong force that is given off by a magnet, it might seem like gluing two of them together would be a difficult task. However, most people don’t know that this can actually be done in just a few simple steps.

As long as the correct materials are used as well as the correct technique, you will be able to attach your magnets in no time. Keep reading to find out how you can glue one magnet to another in the easiest way possible.

How To Glue One Magnet To Another

The process of gluing one magnet to another is much different from attaching a magnet to another surface or connecting two foreign objects. This is due to the fact that magnets have their own magnetic force, which can interfere with the other during this task.

However, gluing two magnets together will still only require a few simple and easy to follow steps, as outlined below.

How To Glue One Magnet To Another:

1. Determine which sides you will be gluing together
2. Clean the surfaces
3. Scratch the surfaces
4. Apply a small amount of the correct glue to one of the surfaces
5. Apply pressure to both magnets
6. Allow them to dry before using

In order to glue one magnet to another, you will need to first determine which sides you will be gluing together. As mentioned before, the magnetic force that is given off by each magnet could possibly cause them to interfere when you are trying to connect them.

A more detailed explanation of this process and how to go about determining the correct side to glue together will be outlined in the next section.

After you have decided which side of each magnet will be glued, both of these surfaces will need to be cleaned off for any dust or obstructive debris. This can be done with a damp cloth and some warm water very quickly and easily.

Next, you will need to scratch both of the surfaces that were just cleaned. This is due to the fact that the surface of most magnets are smooth and can become slippery, so you will want to create some kind of friction between them in case they slip.

This issue can be easily solved by taking a sharp metal object such as a loose screw, nail, or an open paperclip and scratching the surface in all directions. The ridges that are created in the surface of the magnet will help to hold them together along with the glue after you have finished.

Another crucial part of this project will be choosing the right type of glue, which will also be described in more detail in the next sections. With the glue of your choice, you will apply a small amount to the middle of one of the surfaces.

The size of the dot of glue that you place on the magnet will depend on the individual size, but you will not want the glue to spread out too close to the edges when you connect the two.

Lastly, you will need to apply pressure to both magnets, pressing them together firmly, and wait for them to dry before using them. The ideal time frame for drying can be up to one full day for the best results.

Gluing Magnets - Which Side Is Correct?

When it comes to magnets, it is no secret that they are capable of using their force to push each other away if the wrong sides are connected. So, why does this happen and how can you tell which side is the right one before you begin gluing?

In magnetism, this concept is known as polarity. The polarity of a magnet is defined as its two “poles”, which is the direction in which the magnetic field is facing. Each magnet has a North and the South Pole that faces each way.

In terms of the poles of two magnets, opposites are attracted to each other. To be more specific, the North Pole of the first magnet will be drawn toward the South Pole of the other, but both North Poles of each magnet will repel each other.

If you have ever tried to connect two of the same poles of different magnets together, you probably had a very difficult time getting them to touch. This will be the same issue that you will encounter when you are trying to glue them together as well, which is why it is important to be able to differentiate the poles.

How To Find The Correct Side Of Each Magnet:

• Using marked magnets
• Trial and error before gluing
• Performing a test

When you are trying to find the correct side of each magnet to connect to the other, you can choose to work with magnets that are already marked according to their poles.

Alternatively, you can go with some trial and error before applying the glue, by attempting to connect each side of the magnets until you find the correct one.

If you have some extra time on your hands, you can also perform a test. One of the most common tests can be conducted with a compass, and the North and South ends of the pointer will basically lead you right to the corresponding poles.

The Best Glue For Magnets

When magnets are glued together for one reason or another, it is increasingly important to use the right type of glue to avoid any problems that could possibly arise. If you are ever in doubt of the kind of glue you will be using, you can use this quick list as a reference.

Best Glue For Magnets:

• Two-part epoxy glue
• Super Glue
• Crazy glue
• Gorilla glue
• Silicone glue
• Mod Podge
• Liquid Nails

The number one best glue to use for attaching magnets to any surface, including other magnets, is two-part epoxy glue. Alternatively, you can use super glue, crazy glue, gorilla glue, silicone glue, liquid nails, and even mod podge in some situations.

Regardless of the type of glue that you choose to use for your magnets, it is important that you apply the correct amount and follow the steps that were outlined in the previous sections for the best results.

As you can see, the process of gluing two magnets together is not as difficult as you might have assumed. No matter what level of experience you have with magnet crafts, it is something that anyone can do with the use of the right techniques.

Related Questions

Can I use hot glue on magnets?

When gluing magnets together or onto other surfaces, you will want to stay away from applying any kind of heat to avoid demagnetization.

How long do magnets last?

Depending on the type and strength of the magnet, they have the potential to last for several decades at a time. Permanent magnets, for example, can last for up to 100 years.