Countersunk pot magnet, Ø32 mm.
From 10 pieces : 6,80 EUR
From 50 pieces : 6,00 EUR
From 100 pieces : 5,40 EUR
From 500 pieces : 4,60 EUR
From 1000 pieces : 3,80 EUR
From 10 pieces : 8,50 EUR
From 50 pieces : 7,50 EUR
From 100 pieces : 6,75 EUR
From 500 pieces : 5,75 EUR
From 1000 pieces : 4,75 EUR
READ ABOUT POWER MAGNETS HERE BEFORE YOU BUY!
Product number: MAGZ-316-P
Countersunk magnets | Shallow magnets
Diameter: 3.2 cm
Height: 7.8 mm
Screw hole: Ø5.5 mm.
Strength: approx. 32 kg.
Very powerful pot magnet. These countersunk pot magnets can be fastened with a countersunk screw (5.5 mm).
The steel improves the adhesiveness of the magnet due to direct contact with a thick steel surface.
Strength is measured directly on a thick, magnetic steel plate. The strength of the pot magnets is weakened the further away from the magnetic surface they get.
Pot magnets have a stronger pull when attached to horizontal surfaces than vertical surfaces as they tend to slide down vertical surfaces.
Please note: These hook magnets are not stainless steel so indoor use is recommended.
Not suitable for magnetic glass boards.
Strength: approx. 32,000 gr.
Surface: nickel-plated (Ni)