This Is Just How To Glue Magnet On To Plastic [Step By Step]
After seeing a pair of very creative refrigerator magnets that were made out of plastic buttons, I wanted to complete a similar project myself. Curious about the right way to flue a magnet onto this kind of material, I did some research and pulled together a step by step guide on how to glue a magnet onto plastic.
How can you glue a magnet onto plastic? In order to glue a magnet on to plastic, you will need to have the right kind of glue and follow a few helpful techniques. The best glue for magnets and plastic are two-part epoxy glue and Fevi Quick.
To make sure that your magnet stays glued to the plastic, you will want to sand or scratch both surfaces before you apply the glue.
There are plenty of DIY projects that can include gluing a magnet onto a plastic surface or something similar. If you are a frequent crafter who might run into the question of what the best type of glue for this purpose is, you’ve come to the right place.
Keep reading for a detailed and straight forward guide on the correct way to glue a magnet onto plastic that will help you in your future creative endeavors.
How To Glue a Magnet On To Plastic
Magnets are very versatile objects that can be glued onto almost any surface, including other magnets. In order to successfully glue a magnet onto plastic, there are a few tips and techniques that you will want to follow for the best results.
Take a look at the list of basic materials and some general steps that will help you to glue a magnet to any plastic surface of your choice.
- Plastic surface
- Sandpaper or something sharp (ie screw)
- Strong adhesive
- Clean damp cloth
How To Glue a Magnet On To Plastic:
- Gather your materials on a clean flat surface
- Prepare both surfaces by wiping them with a clean damp cloth
- Scratch both clean surfaces with either sandpaper or something sharp
- Apply a small amount of adhesive to the center of one of the surfaces
- Place the magnet onto the plastic and firmly apply pressure
- Allow them to dry before using
To begin, you will need to first gather all of your materials onto a clean flat surface such as a table top. The materials needed will be your magnet, plastic surface, sandpaper or something sharp like a screw, a strong adhesive, and a clean damp cloth.
Before anything, you will need to prepare both the magnet and plastic surface by wiping them with a clean damp cloth to remove any debris or obstructions.
Next, both surfaces will need to be scratched using a sheet of sandpaper or something equally sharp such as a loose screw, nail, or open paper clip. The scratches should be going in all direction to create a better grip between the two objects.
Next, you will apply a small amount of adhesive to the center of one of the surfaces that will be enough to hold both of them together. Place the magnet onto the plastic and firmly apply pressure before allowing them to dry.
Depending on the size of your project, you might want to leave them to dry for an entire day before coming back to move or use your creation.
The Best Glue For Magnets and Plastic
When it comes to gluing magnets and plastic together, you will want to make sure that these two objects will stick for as long as you will need them to. In order to achieve this, you will need to select the right type of glue for this purpose.
Fortunately, you will not have to look any further for the right type of glue for any plastic and magnet project you will be working on in the future. As a result of my detailed research, I came up with a quick list of the best glues for this particular purpose.
Best Glue For Magnets and Plastic:
- Fevi Quick
- Two-part epoxy glue
- Gorilla glue
- Crazy glue
- Super Glue
- Mod Podge
- Liquid nails
- Silicone adhesive
The absolute best glue for magnets and plastic specifically is called Fevi Quick. Due to the extremely strong properties of this liquid adhesive, it is very friendly to magnet and plastic connections.
Additionally, you can opt for two-part epoxy glue, which is equally as effective as the Fevi Quick. If you cannot get your hands on either of these products or you have something else on hand already, you can go with one of the other options.
Gorilla glue, crazy glue, super glue, mod podge, liquid nails, and other types of silicone adhesives can be found at most local craft and hardware stores, whichever one is more convenient for you.
Along with choosing the right type of glue, you will want to make sure that you adhere to the specific steps that were outlined in the previous section for the best results. The last thing you will want to do is allow your magnet and plastic to detach from each other after you have worked so hard to connect them.
Magnet and Plastic: Easy DIY Button Magnets
After I mentioned a DIY button magnet project in the introduction of this article, you might be curious about the types of projects that can be done with magnets and plastic.
In case you would like to attempt this project just like me, I put together a quick list of steps for DIY button magnets, in particular, so you can put your new knowledge of gluing magnets and plastic to good use.
- Plastic buttons
- Small magnet
- Strong Adhesive
- Sandpaper or something sharp (ie screw)
- Clean damp cloth
The materials that are needed for this project will be the same as the general materials list that was provided in the first section, but the plastic surface will be plastic buttons.
Depending on the result that you would like to see from your finished product, you might want to use several colorful buttons that are glued together in one magnet or just a simple magnet with a single button of a neutral color for a more classy look.
Additionally, the steps you will follow to create a beautiful DIY button magnet will be almost identical to the instructions in the first section, with some steps that can be optionally added based on the level of creativity you are going for.
After preparing both surfaces by cleaning and scratching them, and gluing any buttons together that you would like to combine into your first magnet, you will use one of the suggested glue types to attach the magnet to the back of the button.
Apply pressure to the area and allow them to dry for a few hours up to a full day before hanging them up and putting them to use. This is a very beneficial craft project due to the easy steps that are involved and the functional product then you will come out with when you are finished.
Just like this creative DIY button magnet project, the possibilities of what you can do and create with the combination of magnets and plastic is virtually endless. Now that you are aware of the correct glue types and techniques to do so, you will hopefully be able to come up with something equally as decorative and useful very soon.
How can you remove a magnet that has been glued onto plastic?
In order to remove a magnet from plastic, you can soak it in hot soapy water for a clean removal, or apply acetone to the surface.
Can you break a magnet apart?
Due to their fragile texture, magnets can easily be broken apart when they are cut, drilled into, or pulled off of something too quickly.