What Glue to Attach a Magnet Strip to the Glass on Shower Doors?
After learning that magnets can be attached to almost any material, including metal, wood, and even fabric, I started to wonder if similar materials can be used to attach magnetic objects to glass as well. So, I did some research to find out which type of glue is best for attaching a magnet strip to the glass on shower doors.
What glue is the best to attach a magnet strip to the glass on shower doors? The best glues to use for attaching a magnet strip to the glass on shower doors are Silicone Glue and Contact Adhesive. Other types of glues can be used, but using the types of glue i mentioned before is the best choice.
Most people would be surprised to find out that their glass shower doors actually contain magnets. Although they are not exactly visible from the outside, these types of stand-up showers use the strength of a vertical magnet strip to stay firmly closed and keep all of the water inside.
Since these types of projects and installations can get quite expensive when you decide to call in the professionals, knowing how to complete the process yourself certainly won’t hurt. Keep reading to find out what the best types of glue are for attaching magnet strips to the glass on your shower door.
What Glue To Attach A Magnet Strip To The Glass On Shower Doors
In order to be able to install a working magnet strip that will last for years inside of your shower door, effectively keeping it closed with a strong magnetic field, you will need to make sure that it stays in place after you have secured it into place.
The efficiency of the magnet strip inside of your shower door will depend on the type of glue that you decide to use when it is time to attach it.
If you choose an adhesive method that is not durable or sticky enough, you are likely to run into some problems after some time.
The list below outlines some of the most effective methods for gluing magnetic strips onto glass, especially when it comes to the inside of a shower door.
Glue For Attaching Magnet Strips To Shower Doors:
- Silicone Glue
- Contact Adhesive
- Double Stick Tape
Some of the best glues for attaching magnet strips to shower doors are silicone glue and contact adhesive. If you would rather not go with an actual liquid glue, you can choose to go with a very sturdy double stick tape instead.
However, the most highly recommended bonding agent in this scenario would be any type of durable silicone glue.
After you have chosen the correct method of attachment for the magnetic strip inside of the door of your glass shower, you are only halfway to successfully installing it.
Keep reading onto the next sections to find out how you can use one of the glues that were listed above to quickly and efficiently install and repair the magnetic strip in a glass shower.
How To Attach A Magnet Strip Onto a Glass Shower Door
Now that you have a pretty good idea of what types of glue are the best to use for the purpose of attaching a magnet strip to the inside of your glass shower door, you will be able to use this method to actually complete this task.
Take a look at the steps below to find out for yourself how simple it really is to install one of these magnet strips.
- Magnetic Strip for shower door
- Adhesive method of your choice
- Scissors or sharp blade
- Measuring tool
The materials that you will need to install a magnet strip on to a glass shower door is a sheet of thin magnet, which can be found at any local hardware store or online, the adhesive method of your choice, something to cut the magnet with, a measuring tool, and a screwdriver to open the latch.
How To Attach a Magnet Strip Onto a Glass Shower Door:
- Remove the screw on the interior lever of the door (exposing the place for the magnet strip)
- Clear the space where the magnetic strip will be placed
- Cut the magnet strip according to the size of the space
- Apply the glue of your choice to the back of the magnet
- Firmly place the magnet into this area
- Allow the glue to dry
- Replace the lever and secure the screw again
- Open and close the door to test the quality of the magnet
The actual process of installing the magnet strip basically consists of opening the lever, getting rid of any obstructions, applying the glue, and putting everything back together again.
It is a good idea to let the glue completely dry before you close the lever and complete the test on the magnet to avoid any movement of the position you set it in.
How To Repair a Magnet Strip Onto a Glass Shower Door
While most glass shower doors come equipped with a magnetic strip to keep them closed, whether they were installed by a professional or as part of a DIY project, you might run into problems when the magnetic properties are not working as well as they should.
So, what should you do when the magnetic field of your glass shower door has become weaker than it was when it was first introduced into your home?
Fortunately, just like you were able to follow the instructions in the above section to actually install the magnetic strip, you can do the same thing when it comes to replacing it.
Follow the simple steps down below to get your magnetic glass shower door back up and running in no time.
How To Replace a Magnet Strip On a Glass Shower Door:
- Remove the screw on the latch
- Peel the magnetic strip away from the door
- Cut the new strip against the old one for accuracy
- Place the new strip in place of the old one with adhesive
- Replace the latch and shut the door
- Test your repair
To begin the replacement process, you will need to follow a similar set of steps that you did when you actually installed the magnet strip into the door. This will include removing the screw on the latch that will open up the area where the magnet strip will be attached.
Next, you will need to peel the existing magnetic strip away from the door, pulling it completely out of its place and putting it to the side.
The easiest way to make sure that your new magnetic strip is the proper size is to place the sheet up against the old strip that you just removed. By cutting around the lines of the existing magnet strip, you will avoid a long process of trial and error to get your replacement strip to the correct size.
Using any of the adhesive methods that were mentioned earlier, you will attach the new magnetic strip in place of the one that was previously removed, replacing the latch and shutting the door.
Test your repair by opening and closing the door one additional time. If the door sticks together and stays closed, you have successfully fixed your problem.
Are magnets affected by water?
Magnets are able to operate in a lot of different situations, including in the presence of water. In fact, magnets can be completely submerged in a body of water and still be able to give off a magnetic field of the same strength, so you will not have to worry about the magnet strip in your shower becoming weak over time.
How much does it cost, on average, to purchase a magnetic strip for a glass shower door?
To purchase a magnetic strip for a glass shower door at the average retailer, you can expect to spend around $20 to $30, depending on where your device to buy it from.